|
There is a few ways that we clean
cylinder heads. The first process is to simply put the cylinder head into our PMW
wash system which is a machine that uses caustic water heated to 200
degrees and muti high pressure spray heads to clean the cylinder
head. A clean water rinse is processed thru the same machine.
This machine can handle BIG blocks
& Heads.
Shown with 3206 Cat
head
Our next step is to tear down the head
(if a valve job is to be performed) and use high speed stainless
steel wire wheels to clean intake and exhaust ports and surfaces.
With blocks
and heavily contaminated cast iron cylinder heads we completely tear
down the block/cylinder head and submerge them into a heated caustic
Hot Tank for 24 hrs and then process them thru the PMW system.
|
